Clamps

TOOLFAST' compact milling clamp is the most multipurpose, quick and easy to use down-hold milling clamp. It is equally suitable for clamping while all kinds of machining operation on Drilling, Milling, Machining Centre, EDM etc. This clamp does not require any support blocks or any kind of adjustment, clamping is done by simple turtling of the removable spanner key. 

Toolfast’ Mould Clamp is designed specially for low height applications only such as clamping of moulds on plastic injection moulding machines & pressure die casting machines. The compact front portion of the clamp enables it to penetrate into the limited clamping area of the mould and clamp it. The positioning of forged swival washer on required curved groove enables the operator to set the center distance between the clamping portion and the clamping bolt as per the nearest tapped hole available on platen (where there are no T-slots). No supports are required at the rear of the clamp as the rear portion rests on the platen and front holds the mould. Flanged nut is tightened on the swival washer which takes care of the positioning of clamp body. These clamps are equally useful on pressure die casting machines, hydraulic presses & power presses where low height clamping is done. 

'TOOLFAST Universal Strap Clamp is most suitable for die clamping on power presses and a very useful clamp for job clamping on 'T slot table of Drilling, Milling, Shaping, Boring and other machine tools. No supports are required at the rear of the clamp since the body of the clamp is self-positioning as the rear part rests on the table and front holds the job. The body positions itself with the help of swival hinge pin according to the thickness of the workpiece, the T-Bolt remaining in vertical position and the nut is tightened on the flattened portion of swival hinge pin. Clamp is supplied complete with hardened T-Bolt & special nut.